Hollow Block Making Machine,Concrete Block Machine,Concrete Paver Machine

Today, we will analyze the components of QTF4-25 concrete block making machine

 Today, we will analyze the components of QTF4-25 concrete block making machine (just host machine) in detail, so that we can have a deep understanding of its working principle.
A vibrator is fixed on the top surface of the upper pressing mould, an automatic feeder hopper is arranged above the upper mould, the bottom of the bottom mould is provided with a movable base plate, the bottom of the bottom mould is provided with a movable base plate, the core mold holes are uniformly distributed on the base plate, the core mold support plate is arranged at the lower part of the core mold hole, and the core mold support plate is uniformly distributed on the core mold support plate corresponding to the core mold hole on the base plate.
The lower part of the core mold supporting plate is connected with a hydraulic cylinder which can push the core mold support plate to move up and down. This cement brick making machine has a vertical frame, which is equipped with an upper pressing mould controlled by an upper oil cylinder and a bottom mold controlled by a lower oil cylinder. It is characterized in that a vibrator is fixed on the top surface of the upper pressing mould, a movable feeder hopper is arranged between the upper pressing mould and the bottom mold, the bottom part of which is provided with a movable bottom plate, and the bottom part of the bottom mold is provided with a movable base plate, and the base plate is evenly distributed with cores A core mould supporting plate is arranged at the lower part of the core mold hole, and a core mold corresponding to the core mold hole on the base plate is uniformly distributed on the core mold support plate, and the lower part of the core mold support plate is connected with a hydraulic oil cylinder which can push the core mold support plate to move up and down. The core mold is made into a rectangular rectangle, its four sides are inclined inward, and the top is a triangular tip, so as to facilitate demoulding during brick making. The bottom surface of the upper pressing mould is provided with a plurality of block shaped pressing blocks connected by the column, and the brick shaped pressing blocks corresponding to the upper pressing mould are provided with corresponding block brick moulds in the bottom mould.
As shown in Fig. 1 and Fig. 2, a trough type cement brick making machine has a vertical frame 1, in which the upper pressing mould 4 controlled by the upper oil cylinder 3 and the bottom mould 9 controlled by the lower oil cylinder 10 are arranged, a vibrator 2 is fixed on the top surface of the upper pressing mould 4, and a movable feeder hopper 7 is arranged between the upper mould 4 and the bottom mould 9 (See figures 10, 5 and 11 )A movable bottom plate 8 is arranged at the bottom of the bottom mold 9, and a movable base plate 14 is arranged at the bottom of the bottom mold 9. The core mold hole 16 is uniformly distributed on the base plate 14, and the core mold support plate 12 is arranged at the lower part of the core mold support plate 16. The core mold support plate 12 is uniformly distributed with a core mold 11 corresponding to the core mold hole 16 on the base plate 14. The lower part of the core mold support plate 12 is connected with a hydraulic oil cylinder 13 which can push the core mold support plate 12 to move up and down.

concrete block making machine
The core mold 11 is made into a rectangular rectangle, and its four sides have an inward inclined surface 17, the top is a triangular tip 10, and the top 18 is convenient for demoulding during brick making (see Fig. 7, FIG. 8 and Fig. 9). The bottom surface of the upper pressing mould 4 is provided with a plurality of block brick shaped pressing blocks 6 connected by the column 5, and the corresponding block brick mould 15 is arranged in the bottom mould 9 corresponding to the brick shaped pressing block 6 of the upper pressing mould (see Fig. 3 and Fig. 4).
In actual use, the prepared raw material of cement brick is transported to the upper part of the bottom mold 9 through the movable feeder hopper 7, and the movable bottom plate 8 at the bottom of the feeder hopper is pulled out, Each rectangular brick mold 15 of the bottom mold is filled with 15 raw materials. Previously, the core mold 11 on the core mold support plate 12 has passed through the core mold hole 16 (see Fig. 5 and Fig. 6) evenly arranged on the bottom mold base plate 14, and then the feeder hopper 7 is pulled out, Then, the upper mould is pressed downward by the upper oil cylinder 3, and the brick shaped pressing block 6 in the upper pressing mould is pressed on the cement brick in each brick mold of the bottom mold, and then the vibrator 2 is started to compact, the vibrator is closed, the bottom mold and the upper mold are lifted, and the core template 12 is driven downward through the hydraulic oil cylinder 13 at the lower part of the core mold support plate to complete the demoulding of the channel brick. There are 24 brick molds in the bottom mold of this block machine, and 24 trough cement bricks can be produced at one time. The thickness and height of the cement bricks made are the same, which is equivalent to the volume of two ordinary bricks. In this way, the strength of bricks can be enhanced and the construction speed can be improved.
The utility model has the advantages of simple structure, wide application range, fast production speed, good brick quality, strong and durable brick machine, which is suitable for use in small and medium-sized cities and vast villages and towns.
 brick block machine
Previous:
Next: